Solinba

E-mail

Password

Register Forgot password?

NameDescriptionContent
    The Latest Preferential
Working status of different inverter
Source: | Author:Solinba Inverter | Publish time: 2018-07-30 | 1220 Views | Share:
A. 500w & 1000w on grid tie power inverter
buyer can know the inverter's situation as the LED light.
1. green light
a. green light solid on: the inverter go into protection model, it will work when temperature is down
b. green light flash: working properly, more power more faster.
c. green light flash slowly but no output: the inverter's DC voltage is close to the starting working voltage, increase the input voltage, the it will work properly.
2. red light
a. red light solid on: there are several situation when red light solid on.
* the inverter can't scan the country's grid out
* the AC parts may be burned.
b. red light flash faster: the DC input voltage is too high
c. red light flash slowly: the DC input voltage is too low
3. no led light
a. buyer didn't turn on the switch to power on, it is open circuit status
b. please use power meter to test whether the solar panel produce power, if the voltage is too low, it may has no led on.
c. the DC parts may be burned.


B. 1500w off Grid Modified Power Inverter
buyer can know the inverter's situation as the LED light and buzzer.
when buyer hook DC terminals with the battery, no AC loading, turn on the inverter, beep one time, green light on, the inverter are ready to work. if the red light on, long beeps, the inverter is fault.
green light on: when the inverter work, the green light on. the fan will work if the loading is over 200w.
high voltage alarm: the inverter has no output, red light flash fast, it will work again when voltage back.
low voltage alarm: buzzer long beeps, red light solid on, no output, the inverter will work when voltage up.
temperature alarm: buzzer long beeps, red light solid on, no output, the inverter will work when temperature down.

C. 3000w-5000w LF Pure Sine Wave off Grid Power Inverter
buyer can know the inverter's situation as the LED light and buzzer.
Non-power save model
When buyer hook DC terminals with battery, no AC loading, turn on the inverter, red+green+blue led light together, after 1 second, red and blue led off, the green led on (inverter model), the inverter is ready to work.